谁能帮我翻译目录，送积分，谢谢，不要用在线翻译，很急

sdauwangxu

摘要        2
Des        3
1 驱动桥结构方案分析        4
2主减速器总成的设计        6
2.1 主减速器的结构形式的选择        7
2.1.1 主减速器的齿轮类型选择        7
2.1.2  主减速器的减速形式选择        9
2.1.3主减速器主、从动锥齿轮的支承型式        10
2.2主减速器基本参数的选择与计算载荷的确定        12
2.2.1主减速器齿轮计算载荷的确定        12
2.2.2主减速器齿轮基本参数的确定        14
2.3主减速器锥齿轮强度的计算        15
2.3.1单位齿长上的圆周力        15
2.3.2轮齿的弯曲强度计算        16
2.3.3轮齿的接触强度计算        18
3 差速器总成的设计        19
3.1差速器结构形式选择        19
3.2 差速器齿轮主要参数选择        20
3.3差速器齿轮强度计算        24
4        半轴的形式选择        24
5  驱动桥壳设计        27
5.1桥壳的结构型式选择        27
5.2桥壳成型方式        28
参考文献        28
致谢        30

qiantu

Abstract
Dec
Analysis about the program of driving axle structure
Design of main reducer assembly
Selection of the struture form on main reducer
The selection of gear type on main reducer
The selection of decelerating form on main reducer
The bearing type of drive bevel gear on main reducer

Determine of calculation load and celection of basic parameters on main reducer
Determine of gear calculation load on main reducer

Election of gear basic parameters on main reducer

Calculating of  bevel gear strength on main reducer
The peripheral force on per tooth length
Calculation of bending strength on tooth
Calculation of contact strength on tooth
Design of differential assembly
Selection of the struture form on differential
Selection of main parameters on differential
Calculation of gear strength on differential
Selection of half shaft form
Design of drive axle housing
Selection of the struture form on axle housing
Shaping mode of axle housing
Reference documentation
Acknowledge


希望有帮助，初次翻，不对的请指教

qiantu

Abstract
Dec
Analysis about the program of driving axle structure
Design of main reducer assembly
Selection of the struture form on main reducer
The selection of gear type on main reducer
The selection of decelerating form on main reducer
The bearing type of drive bevel gear on main reducer

Determine of calculation load and celection of basic parameters on main reducer
Determine of gear calculation load on main reducer

Election of gear basic parameters on main reducer

Calculating of  bevel gear strength on main reducer
The peripheral force on per tooth length
Calculation of bending strength on tooth
Calculation of contact strength on tooth
Design of differential assembly
Selection of the struture form on differential
Selection of main parameters on differential
Calculation of gear strength on differential
Selection of half shaft form
Design of drive axle housing
Selection of the struture form on axle housing
Shaping mode of axle housing
Reference documentation
Acknowledge

敬请指教