中国汽车工程师之家--聚集了汽车行业80%专业人士 

论坛口号:知无不言,言无不尽!QQ:542334618 

本站手机访问:直接在浏览器中输入本站域名即可 

  • 1953查看
  • 2回复

[底盘电器] J1939协议的问题

[复制链接]


该用户从未签到

发表于 30-7-2009 10:49:45 | 显示全部楼层 |阅读模式

汽车零部件采购、销售通信录       填写你的培训需求,我们帮你找      招募汽车专业培训老师


我看J1939方面的资料 上面有介绍TSC的,就是扭矩速度根据人为定义的TSC来控制。但是为什么后面还有说明,意思就是说在这个速度控制模式下发动机会自动朝着理想的转速或者扭矩去靠近。那么TSC自定义的扭矩或者转速 还有什么用处呢? 注:理想的转速或者扭矩,上面标注的是1800RPM 和 25%的扭矩。

[ 本帖最后由 江北老怪 于 30-7-2009 10:53 编辑 ]


该用户从未签到

发表于 7-8-2009 13:39:48 | 显示全部楼层

I hope can help you.

对于这个问题,楼主没有表达清楚。
TSC是Torque/Speed Control的简称
In the vehicle CAN system,a lot of  CAN users can send TSC,for example,transmission can send TSC to Engine, and transmission can also send TSC to Engine retarder.
In TSC which Transmission send to Engine, it can include a lot of parameters,
like:
Override Control Mode;
Override Control Mode Priority;
Request speed limit;
Request torque limit  and so on.

Override Control Mode Priority meaning: This field is used as an input to the engine to determine the priority of the Override Control Mode received in the TSC message.
Note: It is not required to use the same priority during the entire  override function. For example, the transmission can use priority 01(High priority)during a shift, but can set the priority to 11(Low pritory)at the end of  the shift to allow traction control to also interact with the torque limit of the engine.

评分

参与人数 1积分 +3 收起 理由
清雅轩 + 3 回帖有奖【论坛口号→知无不言,言无不尽】

查看全部评分

回复 支持 反对

使用道具 举报



该用户从未签到

发表于 13-8-2009 10:36:05 | 显示全部楼层
.....还好我懂点汽车英语    2楼的最好翻译成中文
回复 支持 反对

使用道具 举报

快速发帖

您需要登录后才可以回帖 登录 | 注册

本版积分规则

QQ|手机版|小黑屋|Archiver|汽车工程师之家 ( 渝ICP备18012993号-1 )

GMT+8, 29-7-2025 23:16 , Processed in 0.581605 second(s), 40 queries .

Powered by Discuz! X3.5

© 2001-2013 Comsenz Inc.