诚聘汽车电子设计, 测试

ChrisZhang

电子工程师-BODY
岗位职责：
负责电子系统的设计、开发，负责编制功能测试的计划。
要求：
1、本科以上学历，计算机应用，电子工程、机械类专业
2、至少3年以上汽车电子公司电子开发及软件开发经验；
3、汽车行业的IC Selection, UC 应用能力；
4、熟悉汽车电子设计程序，有EMC设计经验
5、有汽车电子产品功能测试计划、验证经验；
6、有CAN/LIN/K-BUS应用经验
7、熟悉汽车行业 VAVE知识
8、熟悉主要的整车厂的车身电子系统和验证标准者优先
9、英语应用熟练
10.良好的沟通能力，良好的团队合作意识，分析、解决问题能力强


DAS team leader
Qualification Required ( Education, experience,skills, etc. please be specific)           
"1. Bachelor or above, major in computer science, EE or mechatronics;
2. At least 2 years experience on UPA(ultra-sonic parking assistance) and/or reverse-aid camera design/development is required;
3. Knowledge and experience on embeded hardware/software design and automotive level uC application is required;
4. Knowledge and experience on the automotive Tier1 project management is prefered
5. Familiar with new product development process and testing/validation is prefered
6. CAN/LIN/K-bus application experience is prefered
7. Good english communication capability is required
8. Good communication skills required. This person must work well with other engineers in a team environment and should have the analysis/resolve problem capabilities


系统工程师system engineer
Duties of Position岗位职责　　　　　　
?   Responsible for the DAS(driving assistant system) technical study and trend tracking
?   Responsible to set the technical specification for the DAS products
?   Responsible for the technical solution and customer presentation   
Qualification Required ( Education, experience,skills, etc. please be specific)　　
资历要求（教育，经验，技术等）
? Bachelor degree or above, major in Electronics/Mechatronics or relative majors;
? At least 5 years of automotive embedded system design experience required;
? Product design experience with UPA(Ultra-sonic Parking Assistant)/Rear View Camera is  required;
? Knowledge and experience on the Freescale/NEC/Microchip micro processor is required;
? Experience on the technical specification preparation on UPA and camera is required;
? Knowledge and experience on the CAN/LIN application is preferred;
? Knowledge and experience on embedded system software design is a plus;
? Knowledge on the production/validation of UPA and camera is prefered;
? Experience on APQP and product design process is a plus;
? Comprehensive technical English reading & writing and verbal communication skills are required;
? Experience and sense of team playing is required



测试工程师Test engineer(FFT)Test engineer(FFT)
Duties of Position岗位职责　　　　　　
1.负责成品功能测试设备和测试软件的开发;
2.负责对转移产品的测试设备的转移或制作提供技术支持;
Qualification Required ( Education, experience,skills, etc. please be specific)　　
资历要求（教育，经验，技术等）
1. 本科以上学历,计算机应用,电子工程,机械类专业;
2. 至少两年以上汽车工业产品测试系统组建经验;
3.必须有C语言开发经验,熟悉 Visual C++, Labview等;
4. 必须有嵌入式系统开发经验;
5. 必须熟悉NI/ADVANTECH/EVOC数据采集卡的应用;
6. 必须有RS232/RS485 串口应用经验, 熟悉汽车总线协议及CAN/LIN/K-bus 应用更佳;
7. 良好的英语听说能力;
8. 良好的沟通技巧,有团队合作精神,具有分析解决问题的能力


Advanced system engineer
熟悉并了解至少一种车辆电子系统构造；
2、有对硬软件的开发经验，如遥控电子钥匙、制动、车身控制等；
3、对汽车的网状系统（CAN/LIN）能为不同的OEM经行整合实施，并有这方面的相关经验和知识；
4、能通过CANalyzer、CANoe、Cardaq等工具来使用CAN，并有这方面的专长；
5、能够为8比特和16比特的微控器开发嵌入式软件；
6、在机动环境下能开发出可移动的、可在利用的、组件的软件；
7、对机动控制单元电子和硬件有设计经验；
8、对机械工程有基础的知识；
9、对UML以及使用工具有扎实的经验；
10、考虑到会有其他的工作小组、顾客会议、应聘者应当有良好的沟通能力，并且能和其他工程师协调工作